Table of Contents
Advertisement
Quantum DX-Series System Unpacking and Installation Instructions
•
Type 2 to create cartridges on a SPECIFIED storage array.
If this is an upgrade to an existing system, create
Caution:
cartridges ONLY on the new storage arrays.
•
Type 3 to create cartridges on a specified RAID set.
•
Type 4 to exit create cartridges.
3 The system confirms your choice and asks for verification. Type y to
continue.
4 Enter the starting cartridge barcode and press <Enter>.
The barcode format must be AANNNN, where A is any
Note:
uppercase alpha-numeric character and N is any single digit
(0-9). Barcodes automatically increment.
The system indicates partitioning and formatting for each RAID set on
the storage arrays.
5 The system asks how you wish to create cartridges, by quantity or
capacity:
Creating cartridges differs depending on the size of the hard
Note:
drives (250GB, 400GB, or 500GB).
For 250GB Drives:
If you select
a
By quantity
per RAID set. The capacity decreases the more tape cartridges you
create. For example, if you select 1 tape cartridge per RAID set, each
cartridge has approximately 1.7 TB (1.45 TB for the second RAID set)
in capacity. If you select 80 tape cartridges, each cartridge has 20 GB
capacity.
If you select
b
By capacity
1450 for second RAID set) capacity per cartridge. The number of
cartridges decreases with higher capacity per cartridge. For example,
if you select 20 GB per cartridge, the number of cartridges per RAID
set is 80. If you select 1700 GB per cartridge, the number of cartridges
per RAID set is 1.
The capacity estimates mentioned in the examples above
Note:
assume a RAID 5 configuration on the storage array with
"global hot" spare. If a "global hot" spare is not used, the total
capacity is increased by 250GB. If two "global hot" spares are
used, the total capacity is decreased by 250GB.
Configuring the DX-Series System
Document 6513502-06 A01
, you can create between 1 and 80 cartridges
, you choose between 20 and 1700 GB (43 and
October 2006
0
61
Advertisement
Table of Contents
