Quantum DX100 Unpacking And Installation Instructions page 22

Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
Figure 15 Assembling the
Right and Left Support
Brackets
Front mounting bracket
Left support bracket shown
22
slotted screws
back mounting bracket
2 Remove the right and left slide rails from the support brackets.
3 Install the right and left slide rails on the Fibre Channel switch with three
slotted screws on each side (see
Installing the DX-Series System
slotted screws
Second mounting hole
figure 16).