Table of Contents
Advertisement
Figure 63 Install SSL
Certificate Page
Configuring the Fibre
0
Channel Settings
Quantum DX-Series System Unpacking and Installation Instructions
3 To add a SSL certificate, click
The
Install SSL Certificate
4 Under
Upload Your SSL certificate file
the new SSL certificate file.
Use the
Note:
Browse
desired SSL certificate file. The SSL certificate file must be
named
server.crt
5 Click
to install the SSL certificate file.
Upload
6 Type your private key and press
7 Type your pass phrase and press
8 A
Successful Upload
has been installed on the system. Click
The certificate displays in the certificate area on the SSL page.
The DX-Series system allows you to control and configure the Fibre Channel
HBAs that reside in the controller.
To configure the
Fibre Channel
1 In the
Configuration
The management frame displays the
Configuring the DX-Series System
.
New
page displays (see
, type the location and filename of
button to browse the system and locate the
.
.
Enter
.
Enter
page displays indicating that the SSL certificate file
to continue.
Ok
page:
page, click
Fibre Channel
Fibre Channel
Document 6513502-06 A01
October 2006
figure
63).
.
page (see
figure
64).
75
Advertisement
Table of Contents
