Product Range; Product Compatibility; Operating Modes - Ziton ZP1-F2 Installation Manual

Chapter 1: Introduction

Product range

The ZP1-F Series includes the models shown below.
Model Description
ZP1-F2 Two-zone conventional fire alarm control panel
ZP1-F4 Four-zone conventional fire alarm control panel with fire routing
ZP1-F8 Eight-zone conventional fire alarm control panel with fire routing
All models have been designed in accordance with EN 54-2, EN 54-4,
BS 5839-1, NBN S 21-100, and NEN 2535 standards. For further details, see
Appendix B "Regulatory information" on page 101.

Product compatibility

Products compatible with these control panels are listed in the product
compatibility list. Only those products specified in the compatibility list are
guaranteed to be compatible.
To download the latest product compatibility list, visit firesecurityproducts.com.

Operating modes

Supported operating modes are shown in the table below. The default operating
mode is EN 54-2 (with EN 54-13 supervision disabled).
Table 1: Operating modes
Operating mode
EN 54-2 (default)
EN 54-2 Evacuation
EN 54-2 Scandinavia
BS 5839-1 (No 2nd stage)
BS 5839-1 (2nd stage)
NBN S 21-100
NEN 2535 [2]
[1] EN 54-13 supervision requires compatible system wiring and devices and must be enabled
by the installer in the control panel configuration.
[2] Requires a 2010-1-SB expansion board to be installed (not supplied).
2
EN 54-13 option Region
available [1]
Yes European Union
Yes European Union (Spain)
Yes European Union (Scandinavia)
No United Kingdom
No United Kingdom
Yes Belgium
Yes The Netherlands
ZP1-F Series Installation Manual