Page 2
Transparent MCP protection cover seal Caution: This product must be installed by qualified personnel adhering to the CEN/TS 54-14 standard and any applicable A red LED on the front of the ZP787-3 displays its status: local regulations or ordinances. •...
Page 3
Storage temperature −20 to +70°C Installing the backbox Relative humidity 10 to 95% noncondensing The ZP787-3 is designed for surface mounting only. The unit is comprised of a front housing and a backbox, as shown in Regulatory information Figure 3. Manufacturer...
Page 4
4 / 4 P/N 501-2094ZE-1-04 (EN) • REV 04 • ISS 18OCT12 D 1073-1...
Need help?
Do you have a question about the ZP787-3 and is the answer not in the manual?
Questions and answers