Ziton ZP1-F2 Installation Manual page 40

Chapter 3: Configuration and commissioning
Display Menu
Restore previous
configuration
Restore factory
configuration
Exit without saving
Exit and save
[1] Additional menu options are available if one or more expansion boards are installed. See
"Expansion board configuration" on page 58.
[2] Additional menu options are available if the panel is configured to be connected to the fire
network (the fire network identifier is not 00). See "Fire network and repeaters configuration" on
page 61.
For connecting the control panel to a fire network, an optional fire network board must be
installed. For further details, see "Connecting a fire network" on page 21 and refer to the
installation sheet for the network board.
34
Values
N/A
N/A
N/A
N/A
Operating mode
All
All
All
All
ZP1-F Series Installation Manual