Ziton ZP1-F2 Installation Manual page 99

BS 5839-1
Table 53: Configuration presets
Preset Control panel
11 Two-zone
11 Four-zone,
eight-zone
12 Two-zone
12 Four-zone,
eight-zone
13 Two-zone
13 Four-zone,
eight-zone
14 Two-zone
14 Four-zone,
eight-zone
[1] Stage 1 "Alert": sounders off during any configured sounder delay.
Stage 2 "Evacuation": sounders intermittent during any configured sounder delay.
[2] The CleanMe feature is not available for Ziton devices.
Table 54: Additional configuration characteristics
Default sounder delay
Default zone delay
Start/Restart sounders
Table 55: Inputs and outputs
INPUT1
INPUT2
OUT1
OUT2
OUT3
OUT4
Note: Two-zone control panels have only two outputs with EN 54-13 disabled (OUT1 and OUT2)
or a single output with EN 54-13 enabled (OUT1/2).
ZP1-F Series Installation Manual
EOL type Output type
Active Class B
Active Class B
Active, CleanMe Class B
enabled [2]
Active, CleanMe Class B
enabled [2]
Active Class B
Active Class B
Active, CleanMe Class B
enabled [2]
Active, CleanMe Class B
enabled [2]
0
0n
Start sounders or restart stopped sounders at Operator user
level with or without a fire alarm event
Class change
Delays off
Sounder circuit
Sounder circuit
Sounder circuit
Sounder circuit
Appendix A: Configuration presets
Sounder Zone type
outputs [1]
2 (stage 1 "Alert") Mixed
4 (stage 1 "Alert") Mixed
2 (stage 1 "Alert") Mixed
4 (stage 1 "Alert") Mixed
2 (stage 2 Mixed
"Evacuation")
4 (stage 2 Mixed
"Evacuation")
2 (stage 2 Mixed
"Evacuation")
4 (stage 2 Mixed
"Evacuation")
93