Chapter 2: Installation
Cabinet installation
Preparing the cabinet
Before installing the cabinet, remove the front cover, and then remove cable
knockouts from the top, bottom, and rear of the cabinet as required.
Where to install the cabinet
Make sure the installation location is free from construction dust and debris, and
immune to extreme temperature ranges and humidity. (See Chapter 5 "Technical
specifications" on page 77 for more information on the operating temperature and
relative humidity specifications.)
Allow for enough floor and wall space so the panel can be installed and serviced
without any obstructions. The cabinet should be mounted so that the user
interface is at eye level.
Note that the control panel must be assembled and installed according to the
ordinances and codes that are in effect in your market or region.
6
ZP1-F Series Installation Manual