Ziton ZP1-F2 Installation Manual page 63

To check the software version:
1. Set the display as shown below, and then press Enter.
2. Select a value (fire panel, expansion board or fire network board) using the
value selection buttons (2 and 4).
3. Press Enter.
4. The software version is displayed in three consecutive segments, as shown
below.
Segment Description
Is the major release identifier
Is the minor release identifier
Is the version cycle number
In the above example, the reading is for software version 1.1.7.
ZP1-F Series Installation Manual
Chapter 3: Configuration and commissioning
Example
57