Installation - Ziton ZP1-F2 Installation Manual

Chapter 2

Installation

Summary
This chapter explains how to install your control panel, and how to connect
zones, fire system devices, and the power supply.
Note: This product must be installed and maintained by qualified personnel
adhering to the CEN/TS 54-14 standard (or the corresponding national standard)
and any other applicable regulations.
Content
Cabinet layout 4
Cabinet layout for two- and four-zone control panels 4
Cabinet layout for eight-zone control panels 5
Cabinet installation 6
Preparing the cabinet 6
Where to install the cabinet 6
Fixing the cabinet to the wall 7
Connections 8
Recommended cables 8
Overview of fire system connections 9
Connecting zones and zone devices 11
Connecting inputs 13
Connecting supervised outputs 15
Connecting the mains power supply 18
Selecting 115 or 230 VAC operation 19
Connecting the batteries 20
Powering auxiliary equipment (24 VDC auxiliary output) 20
Connecting alarm and fault relays 21
Connecting expansion boards 21
Connecting a fire network 21
ZP1-F Series Installation Manual 3