Table of Contents
Advertisement
Introduction
This is the operation manual for the ZP2-A Series fire alarm, repeater, and
evacuation control panels. Read these instructions and all related documentation
entirely before operating this product.
Firmware compatibility
Information in this document covers control panels with firmware version 4.0 or
later. This document must not be used as a guide to operation of control panels
with an earlier firmware version.
To check the firmware version of your control panel, see the Revision report in
the Reports menu. For more information, see "Viewing reports" on page 28.
Product range
The ZP2-A Series includes control panels with the following power options:
•
Small cabinet control panels with up to 4 A output
•
Large cabinet control panels with up to 6 A output
•
Large cabinet control panels with up to 10 A output (-P variants)
The complete range of control panels is shown in the following tables.
Table 1: Small cabinet control panels with up to 4 A output
Model
ZP2-AF1-S
ZP2-AF1-FB-S
ZP2-AF2-S
ZP2-AF2-FB-S
ZP2-AFR-S
ZP2-AFR-FB-S
Table 2: Large cabinet control panels with up to 6 A output
Model
ZP2-AE1
ZP2-AF1
ZP2-AF1-FB
ZP2-AE2
ZP2-AF2
ZP2-A Series Operation Manual
Description
One-loop addressable fire alarm control panel
One-loop addressable fire alarm control panel with fire routing and fire
protection controls
Two-loop addressable fire alarm control panel
Two-loop addressable fire alarm control panel with fire routing and fire
protection controls
Addressable fire alarm repeater panel
Addressable fire alarm repeater panel with fire routing and fire
protection controls
Description
One-loop addressable fire and evacuation alarm control panel
One-loop addressable fire alarm control panel
One-loop addressable fire alarm control panel with fire routing and fire
protection controls
Two-loop addressable fire and evacuation alarm control panel
Two-loop addressable fire alarm control panel
1
Advertisement
Table of Contents
