Ziton ZP1-F2 Installation Manual page 34

Chapter 3: Configuration and commissioning
User level passwords and indications
The default user level passwords and the corresponding LED and seven-
segment display indications are shown in the table below. The seven-segment
display is only visible when the control panel cover is removed. See Figure 1 on
page 4 and Figure 2 on page 5.
Table 16: User level passwords and indications
User level Password
Public None
Operator 2222
Basic installer 3333
Advanced 4444
installer
Note: If you have used advanced configuration options to set a custom input
configuration, zone delay, zone configuration, or zone type, then the seven-
segment display defaults to the custom display operating mode. See "Panel
mode" on page 37 for details.
28
LED
None
The Reset LED is
steady
The Reset LED is
flashing
The Reset LED is
flashing
Default display Custom display
None None
None None
ZP1-F Series Installation Manual