Auxiliary 24 V Reset - Ziton ZP1-F2 Installation Manual

Auxiliary 24 V reset

Use this menu to configure the auxiliary 24 V reset setting, on or off. The default
setting is OFF.
To configure the 24 V reset:
1. Set the display as shown below, and then press Enter.
2. Select a value using the value selection buttons (2 and 4).
3. Press Enter.
4. Save your changes.
The available settings for this feature are shown below.
Display Description
Resetting the control panel resets the AUX 24V output.
Resetting the control panel does not reset the AUX 24V
output.
ZP1-F Series Installation Manual
Chapter 3: Configuration and commissioning
55