Developer - Ricoh R-C4 Service Manual

21 July 2006

3.7.6 DEVELOPER

[C]
[D]
[F]
1. Spread the vinyl sheet provided with
the developer kit on a flat surface.
2. Separate the top and bottom parts of
the PCU. ( 3.7.4)
3. Set the bottom on the vinyl sheet.
4. Remove the front screw [A] (
5. Remove the rear screws [C] (
6. Release the front tab [B].
7. Release the rear tab [D].
8. Separate the top [E] and bottom [F] of the development unit.
9. Turn the gears [G] to remove the developer from the bottom half.
PHOTOCONDUCTOR UNIT (PCU)
[E]
[A]
[B]
B205R924.WMFF
x1)
x2).
3-23
[G]
B205R155.WMFF