Table of Contents
Advertisement
21 July 2006
5802
Printer Free Run
Performs a free run for both the scanner and the printer.
After selecting "1", press "OK" or the
(Clear/Stop) key to stop.
[0 = No / 1 = Yes]
5803
Input Check
Displays signals received from sensors and switches.
Press the
5804
Output Check
Turns on electrical components individually for test purposes. ( 5.1.6)
5807*
Option Connection Check
5807 1
ARDF
5807 2
Paper Tray Unit
5807 3
LCT
5807 4
Finisher
5810
SC Code Reset DFU
Resets all level A service call conditions, such as fusing errors. To clear the
service call, touch "Execute" on the LCD, then turn the main power switch off/on.
5811
Machine No. Setting
This SP presents the screen used to enter the 11-digit number of the machine. The
allowed entries are "A" to "Z" and "0" to "9". The setting is done at the factory, and
should not be changed in the field. DFU
5812
Service Tel. No. Setting
001 Service
002 Facsimile
003 Supply
004 Operation
(Clear Modes) key to exit the program. ( 5.1.5)
Inputs the telephone number of the CE (displayed when a service
call condition occurs.)
Use this to input the fax number of the CE printed on the Counter
Report (UP mode). Not Used
Displayed on the initial SP screen.
Allows the service center contact telephone number to be displayed
on the initial screen.
5-47
SERVICE PROGRAM MODE
key twice to start this feature. Press the
Checks the connectors to the optional
peripheral devices. Execution will return
either a "1" or "0" on the display.
1:Device connected correctly.
0:Device not connected correctly.
Advertisement
Table of Contents
Troubleshooting
