Table of Contents
Advertisement
21 July 2006
5401
Access Control DFU
This SP stores the settings that limit uses access to SDK application data.
5401 6 User Recognition – Copier
5401 16 Use Recognition – Document Server
5401 26 User Recognition – Fax
5401 36 User Recognition – Scanner
5401 46 User Recognition – Printer
5401 76 User Recogntion – Expanded Function 1
5401 86 User Recogntion – Expanded Function 2
5401 96 User Recogntion – Expanded Function 2
5401 200 SDK1 Unique ID
5401 201 SDK1 Certification Method
5401 210 SDK2 Unique ID
5401 211 SDK2 Certification Method
5401 220 SDK3 Unique ID
5401 221 SDK3 Certification Method
5404
User Code Count Clear
Clears the counts for the user codes assigned by the key operator to restrict the
use of the machine. Press [Execute] to clear.
5501*
PM Alarm
5501 1
PM Alarm Interval
Sets the PM interval.
The value stored in this SP is used when the value of SP55012 is "1".
[0 ~ 255 / 0 / 1 k copies/step]
5501 2
Original Count Alarm DFU
Selects whether the PM alarm for the number of scans is enabled or not.
If this is "1", the PM alarm function is enabled.
[0 = No / 1 = Yes]
5504*
Jam Alarm Japan Only
Sets the alarm to sound for the specified jam level (document misfeeds are not
included). RSS use only
[0~3 / 3 / 1 step]
0:Zero (Off)
1:Low (2.5K jams)
2:Medium (3K jams)
3:High (6K jams)
5505*
Error Alarm
Sets the error alarm level. Japan only DFU
[0~255 / 50 / 100 copies per step]
SERVICE PROGRAM MODE
This SP codes are provided for
future customization of the access
control feature. This is to be done
at the factory, not in the field.
DFU
"SDK" is the "Software
Development Kit". This data can
be converted from SAS (VAS)
when installed or uninstalled.
DFU
5-43
Advertisement
Table of Contents
Troubleshooting
