Displaying Only Parameters That Have Been Changed; Displaying Changed Parameters - Omron E5GC User Manual

5 Advanced Operations
5-8 Displaying Only Parameters That
Have Been Changed
5-8-1

Displaying Changed Parameters

You can display only the parameters that have been changed from their default settings. Parameters
that have not been changed will not be displayed. This allows you to easily see which parameters have
been changed so that you can check for parameters that still need to be changed or for errors in the set-
tings. This is particularly effective in the Initial Setting Level and Advanced Function Setting Level,
where there are many parameters. This can also be used to protect the settings by not displaying
unnecessary parameters after the required parameters have been changed. Change chgp (Changed
Parameters Only) in the Protect Level to ON.
Parameters that
have been changed
by the user.
Display
chgp
5 - 22
Parameters in the Setting
Level
01 0 1 08
02 09
02
03 10
04 11
11
05 12
06 13
07 14
Parameter
Changed Parameters
Only
Changed Parameters
Only: Set to ON
(enabled).
Only the parameters that have
been changed from their
default settings are displayed.
Value
OFF (disabled) or ON
(enabled) (default: OFF)
E5@C Digital Temperature Controllers User's Manual (H174)
01
01
02
02
11
Level
Protect Level