Omron E5GC User Manual page 257

wtpt
Changes to settings using key operations are restricted.
Change Setting Protect
This parameter is not displayed if the Event Input Assignment 1 to Event Input
Function
Assignment 6 parameters are set to enable/disable setting changes.
Setting
• The all protect indication (
pfpt
PF Key Protect
This parameter enables and disables PF Key operation.
Function
Setting
chgp
This parameter allows you to display only the parameters that have been changed from
their default settings.
Function
on: Enabled, off: Disabled
Setting
* If the setting of a parameter is changed back to its default setting, it will no longer be displayed. To display it
again, set the Changed Parameters Only parameter to OFF.
E5@C Digital Temperature Controllers User's Manual (H174)
Setting Change Protect
Set value
OFF (default) Settings can be changed using key operations.
ON Settings cannot be changed using key operations. (The protect level settings,
however, can be changed.)
PF Key Protect
Set value
OFF (default) PF Key enabled
ON PF Key disabled (Operation as a function key is prohibited.)
Changed Parameters Only
Setting range
The Event Input Assignment 1 to Event Input
Assignment 6 parameters must not be set to
enable/disable setting changes.
Description
) will light when setting is ON.
Description
Default
off
6 Parameters
6
6 - 5