Omron E5GC User Manual page 318

6 Parameters
st-b
• The setting of this parameter determines when ST operates.
This parameter cannot be used when ST is set to OFF.
Function
Setting
Related Parameters
See
See
Input Type (Initial Setting Level): Page 6-42
PID ON/OFF (Initial Setting Level): Page 6-44
ST (Initial Setting Level): Page 6-45
alfa
• Normally, use the default for this parameter.
• This parameter sets the 2-PID control a constant.
Function
Setting
Related Parameters
See
See
PID ON/OFF (Initial Setting Level): Page 6-44
ST (Initial Setting Level): Page 6-45
tidu
This parameter sets the time unit for the Integral Time, Integral Time (Cooling), Derivative
Time, and Derivative Time (Cooling) parameters.
Function
Setting
Note: The Integral/Derivative Time Unit parameter changes to 0.1 when the RT (robust tuning)
parameter is changed from OFF to ON.
Related Parameters
See
See
Integral Time and Derivative Time (Adjustment Level): Page 6-28
Derivative Time (Cooling) and Integral Time (Cooling) (Adjustment Level): Page 6-29
6 - 66
ST Stable Range
Setting range
0.1 to 999.9
α
Setting range
0.00 to 1.00
Integral/Derivative Time Unit
Setting range
1 to 0.1
Temperature input, standard control, 2-PID control
must be set.
The ST parameter must be set to ON.
Unit Default
°C or °F
15.0
2-PID control must be set.
The ST parameter must be set to OFF.
Default
0.65
Control must be set to 2-PID control.
Unit Default
Seconds 1
E5@C Digital Temperature Controllers User's Manual (H174)