Omron E5GC User Manual page 265

sktr
• This parameter measures and displays the remaining time of the soak time for the simple
program function.
Function
Monitor
*
Related Parameters
See See
Program Start (Operation Level): Page 6-12
Soak Time (Adjustment Level): Page 6-31
Wait Band (Adjustment Level): Page 6-32
Program Pattern (Initial Setting Level): Page 6-46
Soak Time Unit (Advanced Function Setting Level): Page 6-83
r-s
This parameter starts and stops the control operation.
When run (RUN) is selected, control is started. When stop (STOP) is selected, control is
stopped. The STOP indicator will light when control is stopped.
The default is run.
Operation
This parameter will not be displayed if an event input is set to "RUN/STOP."
See
See
E5@C Digital Temperature Controllers User's Manual (H174)
000
Soak Time Remain
Monitor range
0 to 9999
Seconds is supported only by the E5DC and E5GC. (The E5DC must be manufactured in July
2014 or later (version 2.2 or higher).)
RUN/STOP
The Program Pattern parameter must not be set to
OFF.
Unit
min, h, or s*
The Event Input Assignment 1 to 6 parameters
must not be set to RUN/STOP.
6 Parameters
6
6 - 13