Omron E5GC User Manual page 321

o-dp
This parameter is used to display the manipulated variable (MV).
The manipulated variable is displayed when the MV Monitor (Heating) and MV Monitor
(Cooling) parameters are set to ON, and not displayed when these parameters are set to
Function
OFF.
Setting
Related Parameters
See
See
MV Monitor (Heating) (Operation Level): Page 6-16
MV Monitor (Cooling) (Operation Level): Page 6-16
ret
• In the Operation Level, Adjustment Level, or Monitor/Setting Item Level, the display
automatically returns to the PV/SP if there are no key operations for the time set for this
parameter.
Function
• The automatic display return time is disabled when the parameter is set to OFF. (In that
case, the display will not be automatically switched.)
Setting
brgt
This parameter sets the display brightness to one of three levels. Adjust the level if the dis-
play is too bright.
Function
1 (dark) to 3 (bright)
Setting
E5@C Digital Temperature Controllers User's Manual (H174)
MV Display
Setting range
on: Displayed, off: Not displayed
Automatic Display Return Time
Setting range
OFF, 1 to 99 Seconds
000
Display Brightness
Setting range Default
A Standard Model must be used.
Default
off
Unit Default
off
3
6 Parameters
6
6 - 69