Omron E5GC User Manual page 307

o1th
o1tl
• This parameter sets the upper and lower limit values for simple transfer output 1.
• You can use this parameter only for the E5CC-U, E5DC, or E5GC.
The E5CC-U must be manufactured in May 2014 or later (version 2.2 or higher) and the
Function
E5DC must be manufactured in July 2014 or later (version 2.2 or higher).
output type
Setting
Simple
transfer SP
Simple
transfer
ramp SP
Simple
transfer PV
Simple
transfer MV
(heating)
Simple
transfer MV
(cooling)*
*
Related Parameter
See See
Control Output 1 Assignment (Advanced Function Setting Level): Page 6-80
E5@C Digital Temperature Controllers User's Manual (H174)
Simple Transfer Output 1 Upper
Limit
Simple Transfer Output 1 Lower
Limit
Transfer
Setting range
SP lower limit to SP upper limit
SP lower limit to SP upper limit
Temperature Input setting range
input lower limit to input
setting range upper
limit
Analog input Analog scaling
lower limit to analog
scaling upper limit
−5.0 to 105.0
Standard
Heating/ 0.0 to 105.0
cooling
This function can be set for standard control, but the setting will be disabled.
E5CC-U, E5DC, or E5GC only.
There must be a linear current output.
The Control Output 1 Assignment parameter must
specify the simple transfer SP, simple transfer
ramp SP, simple transfer PV, simple transfer MV
(heating), or simple transfer MV (cooling).
Default
Transfer output
lower limit
SP lower limit
Input setting
range lower limit
Scaling lower
limit
0.0
6 Parameters
Transfer output Unit
upper limit
SP upper limit EU
Input setting
range upper
limit
Scaling upper
limit
100.0 %
6 - 55
6