Adjustment Level - Omron E5GC User Manual

6 Parameters
6-4

Adjustment Level

This level is for executing AT (auto-tuning) and other operations, and for set control parameters.
This level provides the basic Digital Controller parameters for PID control (proportional band, integral
time, derivative time) and heating/cooling control.
Power ON
Operation
Level
Press the
O Key for less than 1 s.
6 - 18
To move to the Adjustment Level from the Operation Level,
press the O Key once.
• The set points 0 to 7 in the Adjustment Level are the set
Adjustment
values for switching the set point during multi-SP input.
Level
• The following items are displayed for Digital Controllers with
CT Inputs: Heater current monitors, Leakage current
monitors, HB alarm detection, and HS alarm detection.
Control in progress
• Adjustment level parameters can be changed after setting
the Operation/Adjustment Protect parameter to 0. Displays
and changing
Operation/Adjustment Protect parameter is set to 1 to 3.
Protection is set in the Protect Level.
levels are not possible
E5@C Digital Temperature Controllers User's Manual (H174)
if the