Protect Level - Omron E5GC User Manual

6-2

Protect Level

Four levels of protection are provided on the E5@C, operation/adjustment protect, initial setting/commu-
nications protect, setting change protect, and PF key protect. These protect levels prevent unwanted
operation of the keys on the front panel in varying degrees.
Power ON
Adjustment
Operation
Level
Press the
O
Key for less than 1 s.
Control in
Progress
To move from the Operation Level or
Adjustment Level to the Protect Level, press the
O and M Keys for three seconds* or longer.
pmoV
The password to move to the Protect Level is entered for this parameter.
• If the correct password is entered, the Operation/Adjustment Protect parameter is
displayed.
Function
Related Parameters
See See
Password to Move to Protect Level (Protect Level): page 6-6
E5@C Digital Temperature Controllers User's Manual (H174)
Level
25
0
O M
Press the +
Keys for at least 1 s.

Protect Level

Move to Protect Level
000
Press the O + M keys;
pmov
display will flash.
O M
Press the +
oapt
Keys for at least 3 s.*
* The time taken
icpt
to move to the
Protect Level
can be adjusted
wtpt
by changing the
Move to Protect
Level Time pa-
pfpt
rameter setting.
chgp
pmsk
prlp
Parameters that are protected will not be displayed and
their settings cannot be changed.
The Password to Move to Protect Level password
must not be set to 0.
6 Parameters
Protect Level
Move to Protect Level
Displayed only when a password
0
is set.
000
M
Operation/Adjustment
Protect
0
M
Initial Setting/
Communications Protect
1
M
Setting Change Protect
off
M
PF Key Protect
off
M
Changed Parameters
Only
off
M
Parameter Mask Enable
Displayed only when
on
a parameter mask is set.
M
000
Password to Move to
Protect Level
0
000
M
Page
6-3
6-4
6-4
6-5
6-5
6-5
6-6
6
6-6
6 - 3