Transmitting Data (Usb Interface); Outputting Current Measurement Data; Transmitting Data (To A Pc); Connecting The Pc / Usb-B Interface (Usb Device) - wtw pH 3310 IDS Operating Manual

Transmitting data (USB interface)

Installation of the
USB driver on the
PC
56
9 Transmitting data (USB interface)
9.1

Outputting current measurement data

1. Output the current measurement data to the USB-B interface with
<F2>[USB-Ausgabe].
9.2

Transmitting data (to a PC)

The meter has a USB-B interface (USB Device) e.g. to connect a PC.
Via the USB-B interface (USB Device) you can store data to a PC or printer and
update the meter software.
9.3

Connecting the PC / USB-B interface (USB Device)

Connect the pH 3310 IDS to the PC via the USB-B interface.
System requirements of the PC for installation of the USB driver:
 PC with at least one free USB connection and CD-ROM drive
 Windows 2000, Windows XP, Windows Vista or Windows 7.
1. Insert the supplied installation CD in the CD drive of your PC.
2. Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3. Connect the pH 3310 IDS to the PC via the USB-B interface.
The meter is listed as a virtual COM interface among the connections in
the Windows instrument manager.
4. Set the same transmission data at the connected instrument (PC):
 Baud rate: to be selected in the range 1200 ... 19200
 Handshake: RTS/CTS
 Set at the PC only:
– Parity: none
– Data bits: 8
– Stop bits: 2
pH 3310 IDS
ba77035e01 02/2014