Example 2 On Navigation: Setting The Date And Time - wtw Avantor VWR pH 1100 L Operating Manual

Operation
Setting the date, time
and date format
24
9 Confirm the setting with
The meter switches to the measuring mode.
The selected language is active.

5.2.4 Example 2 on navigation: Setting the date and time

The meter has a clock with a date function. The date and time are indi-
cated in the status line of the measured value display.
When storing measured values and calibrating, the current date and
time are automatically stored as well.
The correct setting of the date and time and date format is important for
the following functions and displays:
 Current date and time
 Calibration date
 Identification of stored measured values.
Therefore, check the time at regular intervals.
Note
After a fall of the supply voltage (empty batteries), the date and time are
reset.
The date format can be switched from the display of day, month, year
(dd.mm.yyyy) to the display of month, day, year (mm/dd/yyyy or
mm.dd.yyyy).
1 In the measured value display:
<F1__>
Using
The instrument is in the setting mode.
2 Select and confirm the System / Clock menu with
<OK>
and .
The setting menu for the date and time opens up.
3 Select and confirm the Time menu with
The hours are highlighted.
<OK>
.
/[Menu], open the Storage & config menu.
pH 1100 L
< >< >
 
< >< > <OK>
 
and
ba77068d05 05/2021
.