1
2
Fig. Left frame side
1. Center hole
2. Center plug
Fig. Cross-section of brake housing
3. Bolt
4. Nut
5. Brake piston
72
3
4
5
4812165001.pdf
Releasing the drum brake
Drum motor brake
Remove the drum brake centre plug (2),
which is accessible through the centre hole (1)
in the left frame side.
Screw in the bolt (3) all the way as shown in the figure.
Now screw in the nut (4) so that it is flush with the
washer, and then an additional 0,75 - 1 turns, holding
the screw in place (3).
The brakes are now released and the machine
can be towed.
Reset the drum motor brake after towing.
Reset the drum motor brake after towing.
Miscellaneous
2023-05-26