Table of Contents
Advertisement
2023-05-26
Introduction
The machine
CA1300 is a 5 ton vibratory roller intended for
compaction work in trenches, on roads and in confined
areas in conjunction with refilling work.
Intended use
CA1300 is available in a D (smooth drum) and PD
(padfot) version. The smooth drum version with drum
drive (D) ensures good accessibility even on very
steep slopes. The PD version, with pads and drum
drive, is specially intended for the compaction of silt
and loamy soils. The roller can also be used for repair
work on dams, power stations, car parks and airfields.
Training
The purpose of operator training is to impart the
operator the knowledge and skills necessary for
proper operation and routine maintenance of the roller
according to this manual.
Note to trainer: Further information on operator training can be
found in ISO 7130.
Signal symbols and meaning
WARNING ! Indicates potential hazardous
WARNING ! Indicates potential hazardous
situation/procedure which, if not avoided, could
situation/procedure which, if not avoided, could
result in death or serious injury.
result in death or serious injury.
CAUTION ! Indicates potential hazardous
CAUTION ! Indicates potential hazardous
situation/procedure which, if not avoided, could
situation/procedure which, if not avoided, could
result in minor or moderate injury, damage to
result in minor or moderate injury, damage to
the machine or property.
the machine or property.
Safety information
It is recommended to at least train operators in
It is recommended to at least train operators in
handling and daily maintenance of the machine
handling and daily maintenance of the machine
in accordance with the instruction manual.
in accordance with the instruction manual.
Passengers are not allowed on the machine,
Passengers are not allowed on the machine,
and you must sit in the seat when operating the
and you must sit in the seat when operating the
machine.
machine.
The safety manual supplied with the machine
The safety manual supplied with the machine
must be read by all roller operators. Always
must be read by all roller operators. Always
follow the safety instructions. Do not remove
follow the safety instructions. Do not remove
the manual from the machine.
the manual from the machine.
4812165001.pdf
Introduction
1
Advertisement
Table of Contents
