Table of Contents
Advertisement
1
2
Fig. Planetary gear
1. Plug, position for draining
2. Plug, position for refilling
2023-05-26
Rear axle planetary gear - Oil change
Position the roller with the plug in the planetary gear at
its lowest position, 1.
Wipe clean, unscrew plug (1) and drain the oil into a
container. The volume is approx. 0.9 liters
(0.95 qts)/side.
Save the oil and hand in to an
Save the oil and hand in to an
environment-friendly waste disposal station.
environment-friendly waste disposal station.
Position the roller so that the plug in the planetary gear
is in position 2.
Fill with oil to lower edge of level hole.
Use transmission oil.
See lubrication specification.
Clean and refit the plug.
Change the oil in the second planetary gear
of the rear axle in the same manner.
4812165001.pdf
Maintenance, 6000h
223
Advertisement
Table of Contents
