A/C - System Operation - Fayat Group DYNAPAC CA1300 D Instruction Manual

1
Fig. Activation of air conditioning
1. Knob in position 1
Fig. Activating cooling
2023-05-26

A/C - System Operation

NOTE: When using AC, all windows must be closed
for the system to function efficiently.
Activating air conditioning
To activate the air conditioning, set the ventilation
knob to one of the three following positions:
• Low level - Knob in position 1
• Intermediate level - Knob in position 2
• High level - Knob in position 3
Cooling mode
Use the following settings on the control panel
for rapid temperature reduction in the cab:
3
- To activate cooling mode (compressor ON),
press switch (3) on the AC.
- To activate recirculation of cab air,
press switch (4) to close the fresh air vent.
- Set the heater control (1) to minimum
and turn up the fan speed (2).
- When the temperature has dropped to a comfortable
level, adjust the desired temperature on the heater
control (1) and reduce the fan speed (2).
To deactivate cooling mode, set the knob back
to the start position.
The LED will turn off, indicating that cooling mode
is off.
When the ventilation knob is set to 0 (zero),
cooling mode will automatically be switched off.
4812165001.pdf
Machine description
41