Operation; Before Starting; Master Switch - Switching On - Fayat Group DYNAPAC CA1300 D Instruction Manual

1
2
Fig. Battery isolator
– the machine equipped with ROPS
1. Key
2. Door
3. Padlock
2023-05-26
3
4812165001.pdf

Operation

Before starting

Master switch - Switching on

Remember to carry out daily maintenance. Refer to
the maintenance instructions.
The battery disconnector is located on the right side
of the operator platform. Turn the key (1) to the On
position. The roller is now supplied with power.
The engine hood must be unlocked during The engine hood must be unlocked during
operation, unless the battery disconnector is operation, unless the battery disconnector is
freely accessible from the outside, so that the freely accessible from the outside, so that the
battery voltage can be quickly disconnected if battery voltage can be quickly disconnected if
necessary. necessary.
1
2
Fig. Battery isolator
– the machine is equipped with cab
1. Key
2. Cover
3. Knob
Operation
3
49