Table of Contents
Advertisement
1
2
4
3
Fig. Articulation in the locked position
1. Locking arm
2. Locking pin
3. Locking stud
4. Locking lug
Weight: refer to the hoisting
plate on the roller
1
Fig. Roller prepared for lifting
1. Hoisting plate
2023-05-26
Miscellaneous
Lifting
Locking the articulation
Articulation must be locked to prevent
Articulation must be locked to prevent
inadvertent turning before lifting the roller.
inadvertent turning before lifting the roller.
Turn the steering wheel to the straight ahead position.
Enable the parking brake (31).
Pull out the locking pin (2) fitted with a wire,
and pull up the stud (3).
Fold out the locking arm (1) and place it
over the locking lug (4) on the drum frame.
Fit the locking stub (3) in the holes through the locking
arm (1) and locking lug (4) and secure the stud in
position with the locking pin (2).
Lifting the roller
The machine's gross weight is specified
The machine's gross weight is specified
on the hoisting plate (1).
on the hoisting plate (1).
Refer also to the Technical specifications.
Refer also to the Technical specifications.
Lifting equipment such as chains, steel wires,
Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
straps and lifting hooks must be dimensioned in
1
accordance with the relevant safety regulations
accordance with the relevant safety regulations
for the lifting equipment.
for the lifting equipment.
Stand well clear of the hoisted machine! Make sure
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
that the lifting hooks are properly secured.
4812165001.pdf
Miscellaneous
69
Advertisement
Table of Contents
