Releasing The Brake - Fayat Group Dynapac CC900G Instruction Manual

Figure. Releasing the brake
2019-09-23

Releasing the brake

1. Remove the 2 plugs (191).
2. Press the screws (192) inwards to compress the
springs (193) so that the screw reaches the brake
(107) inner thread.
3. Tighten the two screws (192) alternately a little at a
time so that the brake piston (107) loose (screw
approximately 2 turns).
Tightening the screws (192) too hard can damage Tightening the screws (192) too hard can damage
the inner mechanism the inner mechanism
The machine should be started with reactivated The machine should be started with reactivated
brake. brake.
4812163901_A.pdf
Miscellaneous
45