Table of Contents
Advertisement
1
Fig. Engine suspension
1. Bolted joint
1
Fig. Fuel tank
1. Oil drain pump
2023-05-26
Bolted joints - Checking tightening torque
Check that all the bolts for the suspension of the
engine and the drive unit are tightened.
See under Specifications - tightening torque.
Check the bolted joint between the motor and the
pump drive, and that all the hydraulic components
are tightened to the set tightening torque.
(The above applies to new or replaced
components only).
Fuel tank - Cleaning
It is easiest to clean the tank when it is almost empty.
Pump out any bottom sediment using a suitable pump,
such as an oil drain pump.
Collect the fuel and sediment in a container and
Collect the fuel and sediment in a container and
deliver to environmentally correct handling.
deliver to environmentally correct handling.
Keep in mind fire risk when handling fuel.
Keep in mind fire risk when handling fuel.
The fuel tank is made of plastic
The fuel tank is made of plastic
(polyethylene) and is recyclable.
(polyethylene) and is recyclable.
4812165001.pdf
Maintenance - 1000h
145
Advertisement
Table of Contents
