Table of Contents
Advertisement
Operating panel
The operating panel can be adjusted to the various operating positions: left/right, sit-
ting/standing. The entire operating panel can be swivelled for operation beyond the
outer edge of the vehicle.
m
Make sure it is latched properly!
f
Only adjust the operating position whilst the vehicle is stationary!
Pushing the operating panel:
- Release the panel latch (2) and slide the panel console to the required position.
- Insert panel latch (2) into one of the detent positions (4).
Swivelling the operating panel:
- Lift latch (5), swivel operating panel to the required position and allow latch to en-
gage again in one of the intended detent positions.
Raise/lower the operating panel:
- Release clamping lever (6), lift or lower operating panel.
Tighten clamping lever (6) in required position.
Steering wheel, inclination adjustment (o):
- Press latch (7), swivel steering wheel to the required position and allow latch to en-
gage again.
During longer interruptions and after work has been completed, cover the operating
A
panel with the vandalism protection facility (8) and lock in position.
Service brake ("foot brake") (o)
The brake pedal (9) is in front of the driver's seat.
When the brake is actuated, the speed of the travel drive is automatically reduced (re-
A
gardless of the drive lever position).
- If the vehicle was brought to a standstill with the service brake, it cannot be driven
away again until after the drive lever has been put into neutral!
D 30.18 6
Advertisement
Table of Contents
