Table of Contents
Advertisement
Maintenance measures - 500 / 2500 / 3500 / 4500 / 5500 / 6500 /
3
Fig. Roller, left side
1. Filler plug
2. Drain/Magnetic plug
3. Level plug
1
Fig. Engine compartment
1. Water cooler
2. Hydraulic fluid cooler
126
1
If filling is necessary, loosen the filler plug (1) and fill.
2
Clean and refit filler plug (1).
Coolers
Checking - Cleaning
2
Make sure that the air flow through the coolers (1)
and (2) is unobstructed. Dirty coolers are blown clean
with compressed air or washed clean using a
high-pressure water cleaner.
Blow air or direct water through the cooler in the
opposite direction to that of the cooling air.
4812165001.pdf
Do not overfill with oil - risk of overheating.
Do not overfill with oil - risk of overheating.
Be sure to use only
Be sure to use only
Dynapac gear oil 300 in the roller.
Dynapac gear oil 300 in the roller.
Take care when using a high-pressure water jet.
Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler.
Do not hold the nozzle too near the cooler.
When working with compressed air or a
When working with compressed air or a
high-pressure washer, use the
high-pressure washer, use the
following protective equipment:
following protective equipment:
Safety glasses
Safety glasses
Protective gloves
Protective gloves
Ear protectors
Ear protectors
9500h
2023-05-26
Advertisement
Table of Contents
