Table of Contents
Advertisement
1
4
Fig. Roller, left side
1. Groove
2. Filler plug
3. Drain/Magnetic plug
4. Level plug
224
Drum - Oil change
Position the roller on a flat surface with the groove (1)
2
on the inside of the drum aligned with the top of the
drum frame.
Place a receptacle that holds 10 liters (2.6 gal)
under the drain plug (3).
Clean and unscrew the filler plug (2) and drain
plug (3), and allow all the oil to run out.
3
Clean and refit the drain plug (3) and fill with
oil as per "Drum - Checking the oil level".
Clean and refit the filler plug (2).
4812165001.pdf
Maintenance, 6000h
Observe care when draining hot oil. Use the
Observe care when draining hot oil. Use the
following protective equipment:
following protective equipment:
Safety glasses
Safety glasses
Protective gloves
Protective gloves
Save the oil and hand in to an
Save the oil and hand in to an
environment-friendly waste disposal station.
environment-friendly waste disposal station.
2023-05-26
Advertisement
Table of Contents
