Table of Contents
Advertisement
1
Fig. Engine suspension
1. Bolted joint
4
Fig. Condenser
1. Condenser element
2. Brackets (4 pcs)
3. Screws (4 pcs)
4. Washers (4 pcs)
2023-05-26
Bolted joints - Checking tightening torque
Check that all the bolts for the suspension of the
engine and the drive unit are tightened.
See under Specifications - tightening torque.
Check the bolted joint between the motor and the
pump drive, and that all the hydraulic components
are tightened to the set tightening torque.
(The above applies to new or replaced
components only).
Air conditioning (Optional) - Check
If cooling capacity is noticeably impaired,
clean the condenser element (1) located
1
in front of the radiator in the engine compartment
(see Radiator, Check - Cleaning).
Also clean the cooling unit in the cab.
See under the heading 2000 hours,
air conditioning - overhaul.
3
2
4812165001.pdf
Maintenance, 9000h
249
Advertisement
Table of Contents
