Table of Contents
Advertisement
Fig. – Braking
1.Forward and reverse control
2. Parking brake
44
Interlock/Emergency Stop/Parking Brake
The interlock, emergency stop and parking
brake shall be checked daily before starting the
machine. To check if the emergency stop and
interlock are working correctly, it is necessary
to turn on and off the machine.
To check if the Interlock works correctly, the
operator shall rise from the seat with the roller
moving forwards and backwards (perform the
test in both ways). The operator must hold the
steering wheel firmly and be ready for a sudden
stop. The alarm will be activated and after 4
seconds the engine will turn off and the brakes
will be activated.
To check if the emergency stop works correctly,
the operator shall press the corresponding
button with the roller moving forwards and
backwards (perform the test in both ways).
Next, the operator must hold the steering wheel
firmly and be ready for a sudden stop. The
engine will be turned off and the brakes will be
activated.
To check if the parking brake works correctly, it
shall be activated with the roller moving
forwards and backwards (perform the test in
both ways). The operator shall hold the steering
wheel and be ready for a sudden stop when it is
activated. The engine does not turn off.
Normal braking
Stop de compactor, putting the forward and reverse control (1)
in neutral.
Always enable the parking brake (2), before leaving the operator
platform.
When starting a cold engine and drive, which
implies cold hydraulic oil; braking distances are
greater than when the oil has reached its normal
working temperature.
When the forward and reverse control is pushed rapidly to
neutral, or away from it, the system goes into rapid braking
mode, and the machine stops.
Activate the normal mode by placing the forward and reverse
control in neutral.
4812325556EN
Operation
08/01/2023
Advertisement
Table of Contents
