Table of Contents
Advertisement
Fig. Instrument panel
6. Warning panel
29. Emergency stop
30. Starter switch
Fig. view
2023-05-26
Instruments and lamps - Checking
Make sure that the emergency stop (29) is pulled
Make sure that the emergency stop (29) is pulled
6
out. When the roller is in neutral or there is no load
out. When the roller is in neutral or there is no load
on the operator seat, the automatic brake function
on the operator seat, the automatic brake function
is engaged.
is engaged.
Pull out the emergency stop (29).
Turn the power switch (30) to position 3a.
29
Check that the warning lamps in the
warning panel (6) illuminate.
30
View
Before starting, make sure that the view
forwards and backwards is unobstructed.
All cab windows must be kept clean and rear view
mirrors (depending on the roller's equipment level)
must be kept clean and adjusted for good visibility.
4812165001.pdf
Operation
53
Advertisement
Table of Contents
