Table 16: System Status Led Assignments; Figure 67: Fan Status Led In Sn2700 - Front And Rear Sides; Figure 68: System Status Leds - Front Side In Sn2740 - Mellanox Technologies Spectrum SN2740 Hardware User Manual

Table 16 - System Status LED Assignments
LED Behavior
Solid Green
Flashing Green
Solid Red
3.2.1.2 Fan Status LED
The LED in the red oval shows the fans' status.
Rev 2.2
Description
The system is up and running nor-
mally.
The system is booting up.
Major error has occurred. For
example, corrupted firmware, sys-
tem is overheated etc.

Figure 67: Fan Status LED in SN2700 - Front and Rear Sides

Both of these LEDs in the red
ovals show the fans' status.

Figure 68: System Status LEDs - Front Side in SN2740

Mellanox Technologies
Action Required
N/A
Wait up to five minutes for the end of the
booting process.
If the System Status LED shows red five
minutes after starting the system, unplug
the system and call your Mellanox repre-
sentative for assistance.
Interfaces
71