Figure 62: System Status Leds - Front And Rear Sides In Sn2700; Figure 63: System Status Leds - Front Side In Sn2740 - Mellanox Technologies Spectrum SN2740 Hardware User Manual

Table 15 - LEDs Symbols
Symbol
b
a. There are two PSU LEDs in SN2100/SN2010.
b. This LED does not exist in SN2740.
3.2.1.1 System Status LED
The LED in the red oval shows the system's status.
Rev 2.2
Name
Bad Port LED
Unit Identifier LED

Figure 62: System Status LEDs - Front and Rear Sides in SN2700

Both of these LEDs in the red
ovals show the system's status.

Figure 63: System Status LEDs - Front Side in SN2740

Mellanox Technologies
Description
Lights up when a symbol error is detected on
one of the ports.
Lights up on command through the CLI.
Interfaces
Normal
Conditions
Off
Off or blue when
identifying a port
69