Table 14: System Status Led Assignments - Mellanox Technologies SN2700 Hardware User Manual

Interfaces
Both of the System Status LEDs (front and back) supply identical information.
Table 14 - System Status LED Assignments
LED Behavior
Solid Green
Flashing Green
Solid Red
4.2.1.2 Fan Status LED
Figure 37: System Status LEDs in SN2410 - Front Side
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
The system is up and running nor-
mally.
The system is booting up.
Major error has occurred. For exam-
ple, corrupted firmware, system is
overheated etc.
Figure 38: Fan Status LED - Front and Rear Sides
Both of these LEDs in the red
ovals show the fans' status.
Description
N/A
Wait up to five minutes for the end of the
booting process.
If the System Status LED shows red five
minutes after starting the system, unplug the
system and call your Mellanox representa-
tive for assistance.
Action Required
Mellanox Technologies
Rev 1.2
47