Figure 31: Fan Status Led - Front And Rear Sides; Table 14: System Status Led Assignments; Table 15: Fan Status Led Assignments - Mellanox Technologies SX10XX Hardware User Manual

Table 14 - System Status LED Assignments
LED Behavior
Solid Green
Flashing Green
Solid Red
Off
3.2.1.2 Fan Status LED
All fans must be operating while the power supply is plugged in.
Table 15 - Fan Status LED Assignments
LED
Behavior
Solid Green All fans are up and running (normal
condition).
Description
The system is up and running (normal
condition).
The system is booting up. This assignment
is valid on managed systems only.
Major Error has occurred. For example,
corrupted firmware, system is overheated
etc.
The system has no power.

Figure 31: Fan Status LED - Front and Rear sides

Mellanox
®
PS1
PS2
UID
RST
Description
N/A
Wait up to five minutes for the end of the
booting process.
If the System Status LED shows red five
minutes after starting the system, unplug the
system and call your Mellanox representa-
tive for assistance.
Check the power source and cable.
This is a two color LED
!
Action Required
N/A
Mellanox Technologies
Action Required
45