Figure 59: System Status LEDs - Front and Rear Sides in SN2410
Both of the System Status LEDs (front and back, if exist) supply identical information.
Table 16 - System Status LED Assignments
LED Behavior
Solid Green
Flashing Green
Solid Red
64
Both of these LEDs in the red
ovals show the system's sta-
tus.
Figure 60: System Status LED in SN2100
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
Description
The system is up and running nor-
mally.
The system is booting up.
Major error has occurred. For
example, corrupted firmware, sys-
tem is overheated etc.
Mellanox Technologies
The LED in the read oval is located on
the front panel of SN2100. There are no
LEDs in the rear panel of SN2100.
N/A
Wait up to five minutes for the end of the
booting process.
If the System Status LED shows red five
minutes after starting the system, unplug
the system and call your Mellanox repre-
sentative for assistance.
Action Required
Rev 1.9