4.2.1.1 System Status LED
Both of the System Status LEDs (front and back) supply identical information.
Table 13 - System Status LED Assignments
LED Behavior
Solid Green
Flashing Green
Solid Red
Figure 25: System Status LEDs - Front and Rear sides
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
Description
The system is up and running normally
The system is booting up. This assignment
is valid on managed systems only.
An error has occurred. For example, cor-
rupted firmware, system is overheated etc.
Action Required
N/A
Wait up to five minutes for the end of the
booting process.
If the System Status LED shows Red five
minutes after starting the system, unplug the
system and call your Mellanox representa-
tive for assistance.
Mellanox Technologies
Rev 1.2
41