Figure 23: System Status Leds - Front And Rear Sides; Table 12: System Status Led Assignments; Fan Status Led - Mellanox Technologies SX67X0 Hardware User Manual

3.2.1.1 System Status LED
Both of the System Status LEDs (front and back) supply identical information.
Table 12 - System Status LED Assignments
LED Behavior
Solid Green
Flashing Green
Solid Red

3.2.1.2 Fan Status LED

31
Mellanox Technologies

Figure 23: System Status LEDs - Front and Rear sides

It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
Description
The system is up and running normally
The system is booting up. This assignment
is valid on managed systems only.
Major Error has occurred. For example,
corrupted firmware, system is overheated
etc.
All fans must be operating while the power supply is plugged in.
Action Required
N/A
Wait up to five minutes for the end of the
booting process.
If the System Status LED shows red five
minutes after starting the system, unplug the
system and call your Mellanox representa-
tive for assistance.
Interfaces