Figure 52: System Status Leds 5 Minutes After Power On In Sn2700; Figure 53: System Status Leds 5 Minutes After Power On In Sn2740; Figure 54: System Status Leds 5 Minutes After Power On In Sn 2410 - Mellanox Technologies Spectrum SN2740 Hardware User Manual

Check the System Status LEDs and confirm that all of the LEDs show status lights consis-
Step 4.
tent with normal operation (initially flashing, and then moving to a steady color) as shown
in

Figure 52: System Status LEDs 5 Minutes After Power On in SN2700

Figure 53: System Status LEDs 5 Minutes After Power On in SN2740

Figure 54: System Status LEDs 5 Minutes After Power On in SN 2410

Rev 2.2
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
Figure 52 below. For more information, refer to "LEDs".
Mellanox Technologies
Installation
55