Figure 25: System Status Leds - Front And Rear Sides; Table 13: System Status Led Assignments - Mellanox Technologies SB7700 User Manual

*This function is currently disabled.
4.2.1.1 System Status LED
Both of the System Status LEDs (front and back) supply identical information.
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
Table 13 - System Status LED Assignments
LED Behavior
Solid green
Flashing green
Solid amber
Rev. 1.7

Figure 25: System Status LEDs - Front and Rear sides

Description
The system is up and running nor-
mally
The system is booting up. This
assignment is valid on managed sys-
tems only.
An error has occurred. For example,
corrupted firmware, system is over-
heated etc.
Mellanox Technologies
Action Required
N/A
Wait up to five minutes for the end
of the booting process.
If the System Status LED shows
Red five minutes after starting the
system, unplug the system and call
your Mellanox representative for
assistance.
Interfaces
45