Separating Hydraulic Pump - Kubota BX24 Workshop Manual

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

(2) Separating Hydraulic Pump

Hydraulic Cylinder Block
1. Disconnect the mower linkage (1).
2. Remove the wireharness clamp and wireharness (3) move to the
front side.
3. Remove the connecting bar (2).
4. Remove the hydraulic cylinder block mounting bolt.
5. Remove the hydraulic cylinder block (4).
(When reassembling)
Hydraulic cylinder block
Tightening torque
mounting bolt
(1) Mower Linkage
(2) Connecting Bar
Battery
CAUTION
• When disconnecting the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Remove the under panel (1).
2. Disconnect the negative cable (2) from the battery.
(1) Under Panel
(2) Battery
5-S10
HYDRAULIC SYSTEM
39.2 to 44.1 N·m
4.0 to 4.5 kgf·m
28.9 to 32.5 ft-lbs
(3) Wireharness
(4) Hydraulic Cylinder Block
W1028149
(3) Negative Cable
W1028561
KiSC issued 08, 2019 A